AcryGlaze Clear Acrylic Enamel
Price range: $127.20 through $265.00
Clear Acrylic Enamel that can be used to enhance and develop colour and texture on a wide range of substrates by using different application techniques.
It dries to an exceptionally tough finish.
Available in Flat and Gloss.
- Next day delivery
- Top quality products
- Money back guarantee
AcryGlaze combines the toughness of enamel paint with the ease of an acrylic paint.
It is a water based alternative to clear solvent systems and is particularly suited to interior applications over dressed timber and wooden joinery.
download product specification Download material safety data| Weight | 10 kg |
|---|---|
| Dimensions | N/A |
| Product Features | Tough film ? high resistance to damage Fast dry ? quicker job turnaround Low odour ? reoccupy times reduced Clarity stable ? will not yellow |
| Typical Area of Use | Protecting movie/TV set construction materials and paint work Developing the grain and protecting interior timber trim and doors Enhancing the natural beauty of stone work Protective over coating for paint effects |
| Gloss | Gloss level and description ? matt 5-7% @ 60 degrees |
| Film Properties | Heat resistance ? 70?C maximum Water resistance ? excellent ? suitable for all internal wet areas such as bathrooms, laundries and kitchens Chemical resistance ? resistant to household cleaners: avoid acids and alcohols Solvent resistance ? poor resistance to strong solvents |
| Surface preparation | General preparation of the surface to be painted should be completed before commencing application. All loose material must be removed and surface damage or imperfections made good. The surface must be clean, dry and free of contaminants. |
| Paint requirements | New timber joinery and doors 3 coats at 12?15 square meters per litre per coat Sand between coats if grain raising occurs Paint effects Compatibility should be evaluated before proceeding 2?3 coats 12?15 square meters per litre per coat |
| Application schedule | Touch dry 15 minutes Re-coat time (minimum) 2 hours Curing time 7 days Practical coverage 12?15 square meters per litre Dry film thickness @ 12 square meters per litre 22 microns per coat Application is not recommended if the surface and/or air temperature is less than 10?C or is liable to fall below 10?C during the drying period. |
| Application methods | Good quality paint or cutting in brush Short nap roller ? 6mm?10mm Airless spray minimum 133 bars (2,000lb/sq in) Tip size 13?17 tho |
| Clean up and thinning | Clean up all equipment with water. On very dry substrates or, in warm and/or low humidity, AcryGlaze Flat may be thinned by the addition of up to 50mls of water per litre. Hot weather ? thinners may be added during very hot weather at the rate of up to 50mls per litre. Excessive thinning will lengthen drying times and may have a detrimental impact on handling characteristics. |
| Safety | Read label before use and keep out of reach of children. If medical advice is needed: have product container or label at hand. Wear protective clothing such as overalls, goggles and gloves and ventilate working areas. Wash any paint deposits off skin. If sanding wear face mask to avoid inhaling dust particles. |
| Precautions | AcryGlaze Flat is not recommended for exterior use |
| Environmental Qualities | Manufactured in a carbon neutral certified facility ? ISO 14064-1 VOC 18gms per litre EC07-13 Ecolabel certified ? Environmental Choice EC07-13 Licence number 0703012 |
| Select Size (L): | 1 Litre, 4 Litres, 10 Litres |
| Select Gloss Level: | Semi Gloss, Gloss, Flat |
Related products
